How To Repair A Kitchenaid Stand Mixer

Red stand mixer mixing cream Dmitry_Evs/Shutterstock

Have you noticed your mixer just isn't quite mixing like it used to? Whether y'all're whipping up a batch of Grandma'south famous divinity, or serving a decadent layer cake—you need your stand mixer operating at peak functioning.

Just don't spend the big bucks on a replacement simply nevertheless. Hither's a KitchenAid-approved mixer fix that's super easy. In fact, all y'all need is a apartment-head screwdriver.

Plus: Check out these kitchen gadgets that people tin't end ownership on Amazon.

Does my mixer need to exist adjusted?

First, determine if your mixer's problem is the adjustment level. Look out for these telltale signs:

Later on mixing, ingredients are left on the bottom of the basin
The tilt head is not locking in place
The white apartment beater is chipped on the bottom
There are scrape marks in the lesser of the basin

If you've noticed whatever of the bug listed to a higher place, your mixer needs to exist adjusted higher or lower.

Meet the KitchenAid mistakes everyone is making.

Exercise the dime test

If your mixer bowl is metal, try this trick. (Note: Exercise non attempt with a glass or ceramic basin.)

Identify a dime in the bowl and adhere a apartment beater. Turn to "stir" or low speed, then observe how the dime moves around the bowl. If the dime does not move, your beater is also loftier. If the dime moves around continuously, that means your beater is too depression. If the dime is traveling slowly around the bowl, moving near a half inch with each pass of the beater, the bowl pinnacle is correct.

Conform the superlative of the beater with this quick set

At present that y'all know that your beater tiptop needs to be adapted, all you need to do is plow one little silver screw. Just first, unplug the stand up mixer, just to be safe!

Where is the screw?

On a tilt head mixer you lot will find the screw where the head meets the stand when tilted back. If yous accept a bowl lift mixer, the screw is located on the inside of the stand.

How to adjust the screw

Using a flat-caput screwdriver, turn the screw counterclockwise to enhance the bowl and clockwise to lower the bowl. Just a slight turn is all you'll need. Don't plow the spiral more than 90 degrees in either management. After turning the screw, y'all may desire to apply the dime test once again to text your clearance level, and then repeat the screw aligning as needed.

Dishwasher Repair Tips: Dishwasher Not Cleaning Dishes

Note: Every product is independently selected past our editors. If you purchase something through our links, we may earn an chapter committee.