Can You Repair Fiber Optic Cable

Download Article

Download Article

While a cut or damaged fiber optic cable tin can temporarily take your network downwards, it is possible to quickly fix the cable with the right tools. This wikiHow commodity volition teach yous how to splice a cut cobweb optic cable back together with a fiber optic stripper and cutter and a cobweb optic crimper.

1. 1

   Audit the cut ends for damage. Look at each cut cease of the cablevision and run across if there are tears in the outer coating or exposed and frayed optical fibers. This will allow you to decide where you need to cutting the ends of the cable before yous splice them back together.^[one]

   • Note that fiber optic cables usually accept an orange or brown outer blanket, which lets you identify them when they are function of a bundle of different cables.

2. ii

   Trim off any damage from the cut ends of the cable with a fiber optic cutter. Place one cease of the cablevision in the jaws of a fiber optic cutter then that they volition cut the cable just below any damage. Squeeze the handles of the tool until it cuts all the mode through the cable and the damaged end falls off. Repeat this for the other end of the fiber optic cable.^[ii]

   • This will give you make clean, undamaged ends of the cobweb optic cable that can be spliced together to make it work again.
   • If your fiber optic cable already has clean cuts and the ends are undamaged, you don't take to cut the cable once again.

   Tip: If you have a damaged or cleaved cobweb optic cablevision that isn't cut all the way through, you tin can cut out the damaged section, then follow the remainder of this aforementioned procedure to splice the cut ends back together.

   Advertisement

3. 3

   Strip the cut ends to expose enough wire to fit into a metallic terminal. Hold i cut end of the cablevision upwardly next to a metal terminal to meet how much of the cable coating you need to strip off. Identify the cutting end that far into the strip head of a fiber optic stripper, then squeeze the handles of the stripper and pull the cablevision out to remove the outer blanket. Repeat this for the other cease of the cable.^[3]

   • A metal terminal is a round metallic piece that you tin can crimp onto the ends of a cut fiber optic cable in social club to splice them together.

   Advertisement

1. 1

   Insert the stripped ends into metallic terminals. Slide 1 cut, stripped end of the fiber optic cable all the fashion into a metal concluding until it won't get any further and y'all can meet the end of the cablevision at the other side of the terminal. Repeat this for the other cut, stripped end of the cable.^[4]

   • If y'all can't become the fiber optic cablevision all the way into the terminal, strip off a little bit more than of the outer coating until you tin.

2. 2

   Crimp the metallic terminals onto the ends of the cable. Insert one of the metallic terminals all the mode into a fiber optic crimper. Clasp the handles of the curling to crimp the terminal onto the cable. Repeat this for the other metal last on the other cutting end of the cable.^[5]

   • This will adhere the metal terminals securely to the cutting ends of the cable, so they can exist used to splice the cablevision back together.

3. iii

   Slide the crimped metallic terminals into an inline connector. Push 1 of the crimped metallic terminals all the style into the hole on 1 side of an inline connector until you lot hear information technology click into place. Repeat this for the crimped metallic terminal on the other cut end of the cable.^[6]

   • An inline connector is a rectangular plastic box that has a hole at either end, into which you tin can slide metallic terminals to splice two ends of a fiber optic cable together.

4. four

   Snap the inline connector's cover into identify to secure the cable ends together. Printing the plastic rectangular comprehend onto the inline connector. Push it all the way on until it snaps into place.^[7]

   • This will keep the ends of the cut fiber optic cablevision within the inline connector, and then they cannot exist pulled out.

   Advertisement

Ask a Question

200 characters left

Include your e-mail address to become a message when this question is answered.

Submit

Advert

• There is likewise a machine called a fusion splicer that joins cut cobweb optic cablevision ends together using rut, but these machines cost thousands of dollars and require special training to operate them, so they are not practical for fixing the odd cutting fiber optic cable.

Thanks for submitting a tip for review!

Advertisement

• Always use a fiber optic cutter to cut fiber optic cables or you tin can finish up damaging the cablevision even more. As an alternative, yous can use kevlar shears, which are loftier-precision shears that can cut efficiently through fiber optic cable without damaging information technology.

Advert

Things Yous'll Need

• Fiber optic cutter and stripper
• Fiber optic crimper
• Metal last
• Inline connector

Nearly This Article

Thanks to all authors for creating a page that has been read 28,340 times.

Is this commodity up to engagement?

Source: https://www.wikihow.com/Fix-a-Cut-Fiber-Optic-Cable

Posted by: beadlescohnes.blogspot.com

Share this post